窗体顶端 窗体底端 BOSON Classroom Labs NA Student Lab Guide
TABLE OF CONTENTS INTRODUCTION 3 LAB 1 – BASIC ROUTER CONFIGURATION 9 LAB 2 – ADVANCED ROUTER CONFIGURATION 14 LAB 3 - CDP 17 LAB 4 – 18 LAB 5 - TFTP 20 LAB 6 - RIP 22 LAB 7 – IGRP 24 LAB 8 – EIGRP 26 LAB 9 - OSPF 28 LAB 10 – CATALYST 1900 SWITCH CONFIGURATION 30 LAB 11 – VLANs and TRUNKING (Catalyst 1900 Switches) 33 LAB 12 - CATALYST 2950 SWITCH CONFIGURATION 35 LAB 13 – VLANs and TRUNKING (Catalyst 2950 Switches) 38 LAB 14 – IP ACCESS-LISTS 40 LAB 15 - NAT/PAT 42 LAB 16 - PPP & CHAP 45 LAB 17 – ISDN BRI-BRI using Legacy DDR 46 LAB 18 – ISDN BRI-BRI using Dialer Profiles 48 LAB 19 – ISDN PRI using Dialer Profiles 50 LAB 20 – FRAME RELAY 52 Appendix A - IPX LAB 55 Appendix B: ANSWERS TO QUESTIONS 57 Appendix C: LAB CONFIGURATIONS 64 INTRODUCTION Sim: Overview NA labs contained in this lab guide are based on the Sim. This PC-based product simulates a wide variety of Cisco routers as well as the Catalyst 1900, 2950, and 5000 switches. Sim supports multiple routing protocols, including RIP, IGRP, EIGRP, and single-area OSPF. It supports different LAN/WAN protocols, including PPP/CHAP, ISDN, and Frame Relay. The exercises in this lab guide only require Sim – they do not require access to any external router or switch hardware. It should be noted that Sim supports many, but not all of the mands available on a real router or switch. All mands referenced in this lab guide are supported through the Simulator. Getting Started To invoke Sim, double-click on the Sim icon on your PC screen.
If there is not an icon on the PC screen, you can start Sim by pressing Start -> Sim -> Sim. You will be presented with a screen that has buttons at the top representing each router, switch, or PC that you will be configuring. Press one of the buttons to configure a device. Some of the devices are hidden (Switch 3, Switch 4, PC1, and PC2) and can be accessed by pressing the More Devices b
BOSON Classroom Labs for CCNA 来自淘豆网m.daumloan.com转载请标明出处.
