Debugger功能及使用介绍.pdf

Debugger功能及使用介绍SWRU196A
August 2010
CC Debugger Quick Start Guide
Contents in the box:
 Debugger
 1 Mini USB cable
 1 10-pin flat cable with 2x5 connector
 1 10-pin flat cable with 2x5 connector
 1 Converter board - connector
 Documentation
STEP 1 – Install Tools and Drivers
To get the required USB drivers for the tool, it is mended to download and install
one (or both) of the tools listed below
SmartRF™ Studio rtrfstudio
SmartRF™ Flash Programmer /zip/swrc044
The driver will be stored in C:\Program Files\Texas Instruments\Extras\Drivers
STEP 2 – Connect the Debugger to the Target
Vdd from target
GND
(required)
Connect Debugger to 1 2
DC (Debug Clock) DD (Debug Data)
the target. The minimum 3 4
connection required for SoC
5 6
debugging and programming RESETn
7 8
is shown in the figure to the from debugger
(optional)
right. 9 10
The easiest way to connect is to use the standard 10-pin flat-cable with
the 2x5 mm header with a matching socket on the target board.
The debugger includes a 10-pin flat-cable with a 2x5 mm header for
smaller sockets. Use the adapter board to connect this cable to the
debugger.
Please refer to the User’s Guide for details.
STEP 3 – Connect USB Cable
Connect the USB cable to the debugger and then to the PC.
1/2
SWRU196A
August 2010
STEP 4 – Associate USB Devi