甲类大副英语阅读练习带答案.doc

甲类大副英语阅读练习,带答案。
1. The objective of lashing the coils is to form one large,immovable block of units in the hold by lashing them together . In general,strip coils in three end rows in the top tier should be prevent fore-and-aft shifting in the top tier of bare-wound coils group-lashing should not be applied due to their fragile nature;the end row of a top tier should be secured by dunnage and wires,which are to be tightened from side to side,and by additional wires to the coils are fully loaded over the entire bottom space and are well shored,no lashings are required except for locking coils.
The lashings can be of a conventional type using wire steel band or any equivalent lashings should consist of wires having sufficient tensile first tier should be should be possible to re-tighten the lashings during the lashings should be protected against damage from sharp edges.
If there are few coils,or a single coil only,they should be adequately secured to the ship,by placing them in cradles,by wedging,or by shoring and then lashing to prevent transverse and longitudinal movement.
(1). The locking coil is ________.
// coil used to secure other coils
(2). The general objective of lashing coils is to prevent them from ________.
// and longitudinal movement
(3). When coils are fully loaded over tanktop and are well shored,________.
// lashings are required except for locking coils
(4). If there is a single coil,its securing should be done by ________.
// it in cradle and then lashing it
2. As for sub-contracting and indemnity,the Repairer shall be entitled to sub-contract on any terms the whole or any part of the Works and any and all acts or things that are in the opinion of the Repairer necessary or desirable to carry out plete the Works.
The Customer undertakes that no claim or allegation shall be made against any person by whomsoever the Works is perfo