路由初始化.txt

路由的初始化
实验目的
掌握 setup模式。
实验内容
实验步骤
按照下面的指示,连接网络设备
1、 进入特许模式,键入setup
Router#setup
2、 按回车键确认;
3、 设置全局参数;
4、 设置接口参数;
5、 为每个接口设置拓扑图指定的IP地址和掩码;
6、 show rnning-config;
7、 show startup-config;
8、 copy run start;
9、 再show startup-config。
4实验参考:
Setup的全过程
Router#setup
进入setup配置模式:
--- System Configuration Dialog ---
系统提示是否继续配置setup模式:
Continue with configuration dialog? [yes/no]: yes
回答yes后出现系统的补充说明:
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the system
然后系统提示是否进入basic management setup配置模式,由于涉及管理方面,非本实训内容,所以选择no:
Would you like to enter basic management setup? [yes/no]: no
系统提示是否查看现在的接口配置的汇总信息:
First, would you like to see the current interface summary? [yes]: y
回答yes后出现现有接口配置的全信息:
Interface IP-Address OK? Method Status Prot
ocol
0/0 unassigned YES unset administratively down down
Serial0/0 unassigned YES unset administratively down down
0/1 unassigned YES unset administratively down down
Serial0/1 unassigned YES unset administratively down down
随后设置全局参数:
Configuring global parameters:
配置路由器的主机名:
Enter host name [Router]: LAB_E
默认值为Router;
然后提示系统密码的作用,以及enable password和en