美能达bizhub v复印机维修呼唤m（Minolta bizhub v copier maintenance call M）.doc

美能达bizhub v复印机维修呼唤m（Minolta bizhub v copier maintenance call M）.doc美能达bizhub 163v复印机维修呼唤m2(Minolta bizhub 163v copier maintenance call M2)
Minolta
One hundred and sixty-three
The copier appears "maintenance call"
Two
"
Utility"
-
"Stop!""
-
"
Zero
"
"
Zero
"
-
"Stop!""
-
"
Zero
"
"
One
"
To finish pressing, the display panel es English
[maintenance mode]
Use the up and down key to select ninth items"
Clean
Data
According to the "
OK
Use the up and down key to select fourth items"
Supplies
Life
Counter ATDC
According to the "
OK
Then, turn off the phone and start the call maintenance later
Two
"There's no more.".
Maintenance call
Two
Is the expiration of the call to replace the single drum and carrier, but generally did not arrive
Ten
Ten thousand dollars do not change.
One
Press the effect button first, press the stop button
-
Two zeros
-
Stop key
-
A
Zero
A
One
Go ahead and press the options
The arrow
Head to ninth
In accordance with the
YES
And then choose
SUP
The first long one is pressed
Yes
Then
The number shown above
The value should be negative, and then press
YES
Just fine.
Two
,
Press
"Clear"
-00-
Eliminate
-01
"
Enter maintenance mode,
Choose the
Nine
Item,
Press
OK,
Take fourth,
Press
OK
,
Can clear.
Minolta
220163
Emergence repair call
(M2
Or maintenance call
2)
Terms of settlement
Utility key
-
Stop it
--0--0--
Stop it
--0--1
Select ninth items:
Clear data
Press
OK
Select fifth items:
Supplies counter
Press
OK
Reset, restart the copier.
COF32
yes
ATDC
The inductor (that is, the iron scale is out of proportion)
Enter maintenance mode method: utility key
-
stop
-0-0-
stop
-0-1
Post entry choice
Five
,
FUNCTION
(function mode) press
YES
key
Entry options.
ATDC AUTO ADJUST
Press copy key
Note: This is the automatic adjustment of iron powder, when the automatic adjustment can not be one
Manual adjustment must be used
You have to look at the current iron powder ratio is how much? Exceed
One h