外文出处:
A technical note on the characterization of electroformed nickel shells for their application to injection molds
——aUniversidad de Las Palmas de Gran Canaria, Departamento de Ingenieria Mecanica, Spain
Abstract
The techniques of rapid prototyping and rapid tooling have been widely developed during the last years. In this article, electroforming as a procedure to make cores for plastics injection molds is analysed. Shells are obtained from models manufactured through rapid prototyping using the FDM system. The main objective is to analyze the mechanical features of electroformed nickel shells, studying different aspects related to their metallographic structure, hardness, internal stresses and possible failures, by relating these features to the parameters of production of the shells with an electroforming equipment. Finally a core was tested in an injection mold.
Keywords: Electroplating; Electroforming; Microstructure; Nickel
1. Introduction
One of the most important challenges with which modern es across is to offer the consumer better products with outstanding variety and time variability (new designs). For this reason, modern industry must be more and petitive and it has to produce with acceptable costs. There is no doubt bining the time variable and the quality variable is not easy because they frequently condition one another; the technological advances in the productive systems are going to permit bination to be more efficient and feasible in a way that, for example, if it is observed the evolution of the systems and techniques of plastics injection, we arrive at the conclusion that, in fact, it takes less and less time to put a new product on the market and with higher levels of quality. The manufacturing technology of rapid tooling is, in this field, one of those technological advances that makes possible the improvements in the processes of designing and manufacturing injected parts. Rapid tooling techniques are posed of
a collection o
模具设计外文文献 来自淘豆网m.daumloan.com转载请标明出处.
