BRITISH STANDARD BS5480:1990 Specification for Glass reinforced plastics (GRP) pipes, joints and fittings for use for water supply or sewerage UDC [ + ]::678-462::():/.8 Licensed Copy: Institute Of Technology Tallaght, of Technology, Thu Sep 14 11:16:08 BST 2006, Uncontrolled Copy, (c) BSI BS5480:1990 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Plastics Standards mittee (PLM/-) to mittee PLM/9, upon which the following bodies were represented: British Board of Agrément British Gas plc British Plastics Federation British Plumbing Fittings Manufacturers’ Association British Valve and Actuator Manufacturer’s Association Department of the Environment (Building Research Establishment) Department of the Environment (Construction Industries Directorate) Department of the Environment (Property Services Agency) Department of Transport Electricity Supply Industry in England and Wales Engineering Equipment and Materials Users’ Association Health and Safety Executive Institute of Building Control Institution of Civil Engineers Institution of Gas Engineers Institution of Production Engineers Institution of Water and Environmental Management National Association of Plumbing, Heating and Mechanical Services Contractors Plastics and Rubber Institute Plastics Land Drainage Manufacturers’ Association Royal Institute of Public Health and Hygiene Society of British Gas Industries Society of British Water Industries panies Association Water Research Centre Water Services Association of England and Wales The following bodies were also represented in the drafting of the standard, through mittees and panels: Association of Consulting Engineers This British Standard, having Federation of Civil Engineering Contractors been prepared under the Institution of Mechanical Engineers
