切换控制相关参数.doc

切换控制相关参数.doc:..^1_p5/n5:服务小区的上下行接收电平低于一定门限时启动切换算法,即n5个平均值中至少有p5个平均值小丁•参数l_rxlev_ul/ 0 1 lac cellidl 0 04,0Hreqavechg_act_alg_datarxlev_dl_ho460 0 1 lac cellidl 0 01JHreqtchg_act_alg_datarxlev_ul_ho460 0 1 lac cellidl 0 04,0Hreqavechg_act_alg_datarxlev_ul_ho460 0 1 lac cellidl 0 01JHreqtRXLEV切换魅发RXLEV切换触发N=3P=2N=3P=3—rp—FIts—F甲—B20(-90dBm)HREQAVE=3HREQT=3LRXLEVDLH=Decision_l_p6/n6:服务小区的上下行接收质量低于一定门限时启动切换算法,即n6个平均值中至少有p6个平均值小于参数l_rxqual_ul/ 0 1 lac cellidl 00 4,0Hreqavechg_act_alg_datarxqual_dl_ho460 0 1 lac cellidl 00 1,1Hreqtchg_act_alg_datarxqual_dl_ho460 0 1 lac cellidl 00 0,2chg_act_alg_datarxqual_ul_ho460 0 1 lac cellidl 00 4,0Hreqavechg_act_alg_datarxqual_ul_ho460 0 1 lac cellidl 00 1,1Hreqtchg_act_alg_datarxqual_ul_ho460 0 1 lac cellidl 00 0,2注:Hreqave*Hreqt=<32Decision_l_p7/n7:N7个平均值中至少有p7个平均值大于参数u_rxlev_ul/dl_ih规定的门限而fl接收质量值大于l_rxqual_ul/:N8个平均值屮至少有p8个平均值大于参数ms」:nl~8,pl~p8的取值范围都是1-31,建议将p值设置为2/:上行质量切换开关dl_rxqual_ho_allowed:下行质量切换开关ul_rxlev_ho_allowed:上行电平切换开关dl_rxlev_ho_allowed:下行电平切换开关interfer_ho_allowed:I:扰切换允许pwr_handover_allowed:PBGT切换开关ms_distance_allowed:距离切换开关intra_cell_handover_allowed:小区内切换允许inter_cell_handover_allowed:区间切换允许ho_ex