CCNA 路由器基本配置.ppt

? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-1路由器的基本配置? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-2完成本章的学习后,您可以完成下面的任务: ?创建一个启动或运行配置文件?在全局配置模式下对路由器进行配置?配置一个串口?选择下载IOS文件的路径?如何备份路由器的IOS文件?使用setup mode对路由器进行一些基本配置目标? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-3使用 Setup 模式配置路由器Router#setup --- System Configuration Dialog ---At any point you may enter a question mark '?' for ctrl-c to abort configuration dialog at any settings are in square brackets '[ ]'.Continue with configuration dialog? [yes/no]:yesFirst, would you like to see the current interface summary? [yes]:no? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-4在Setup模式中配置全局参数Configuring global parameters: Enter host name [Router]:P1R1The enable secret is a one-way cryptographic secret usedinstead of the enable password when it exists. Enter enable secret [<Use current secret>]: Enter enable password [ ]:% Please choose a password that is different from the enable secret Enter enable password [ ]:cisco Enter virtual terminal password [ ]: Configure work Management? [no]: Configure IP? [yes]: Configure IGRP routing? [yes]: Your IGRP autonomous system number [1]:...? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-5Configuring interface parameters:Configuring interface TokenRing0: Is this interface in use? [no]: <Return> Configuring interface Serial0: Is this interface in use? [yes]: Configure IP on this interface? [yes]: Configure IP unnumbered on this interface? [no]: IP address for this interface: Number of bits in field [0]: Class work is , 0 bits; mask is Configure Novell on this interface? [yes]: noConfiguring interface Serial1: Is this interface in use? [yes]: no在Setup模式配置端口? 2004, Cisco Systems, Inc. All rights NA 640-801 —10-6Setup 模式下的配置一览功能The following mand script was created:hostname P1R1enable secret 5 $1$g722$dg2UVvWG6eekNRTE5LfmM/enable pas