一种基于信噪比最大化的信号恢复方法.docx一种基于信噪比最大化的信号恢复方法
王心怡,苗晟,郝铁伟
(昆明船舶设备研究试验中心,昆明,650051)
摘要:本文针对平稳噪声下的信号恢复问题,提出一种信噪比最大化指标函数,利用混合信号中噪声 的协方差矩阵先验知识,通过多通道信号的线性组合,恢复出需要检测的信号,并使其信噪比最大化。 本文对方法进行了推导,并进行仿真,结果表明,这种基于信噪比最大化的信号恢复方法能够在信号和 噪声频谱有较大重叠的情况下,增强信号同时抵消噪声,以最大信噪比恢复出需要的信号,效果明显, 具有良好的实际应用价值。
关键词:信号恢复;噪声抵消;信噪比
中图分类号:TP274 文献标识码:A 文章编号:1000-8829 (2011)期数-XXXX-XX
A Signal Recovery Method based on SNR Maximization
Wang Xinyi, Miao Sheng, Hao Tiewei
(Kunming shipbuilding Equipment Research and lest Center, Kunming, 650051)
Abstract: A signal recovery method based on SNR maximization is proposed in this paper, this method use a priori knowledge of the covariance matrix of noise in the mixed signal, recover the required signal and maximize the SNR by linear combination of multi-channel received signal. The method is derived and simulated in this paper, the result shows that the signal recovery method based on SNR maximization can enhance signal and cancel noise in the circumstance that signal and noise have overlapped spectrum, and the recovered signal has maximal SNR, the method has a obviously good performance and good
application value.
Key words: signal recovery; noise canceling; signal-to-noise ratio
1在噪声环境下,恢复信号波形,对信号检测, 信号参数估计等都是重要的。当噪声与信号的频谱 有较大重叠时,通常的滤波降噪方法效果不理想; 有些情况下,能够在采集信号的同时采集到与噪声 相关的参考信号,可以采用自适应抵消的方法⑴。 但是很多情况下,噪声和信号是混合在一起被检测 到的,例如在有电磁噪声干扰的环境内检测外部电 磁信号,就无法同时采集到与电磁噪声相关,而与 外部信号不相关的参考信号,不具备自适应干扰抵 消的使用条件。
一种基于信噪比最大化的信号恢复方法 来自淘豆网m.daumloan.com转载请标明出处.