WELDING STORAGE TANKS 焊接储罐 SCOPE 范围 This specification defines the welding, thermal treatment, examination, and testing requirements for shop and field fabrication of storage tanks. It supplements the codes listed in Section of this specification. 本规程规格书确定了储罐工厂和现场制作的焊接、热处理、检验和测试的技术要求。它是对列在本规程规格书 章节的补充。 Definitions: 定义 Vendor-Contractor: 卖方-承包商: The word Vendor-Contractor will be used for the main supplier responsible for Welding. 单词“卖方-承包商”用来指负责焊接的主要供货方。 Owner: 业主: The word Owner will be used for BASF-YPC. “业主”一词用来指 BASF-YPC 。 Licensor: 签证方: The Licensors are BASF or BASELL etc. 签证方专利商指 BASF 或 BASELL 等。 Purchaser: 采购方: Party responsible for issuing the Purchase Order. This may be the main Engineering, Procurement and Construction (EPC) Contractor acting as an agent for the Owner. 负责发出采购定单的一方。它可以是作为业主代表的工程设计、采购和施工(EPC)承包商。 APPLICABLE CODES, STANDARDS, AND REFERENCES 适用的规范、标准和参考文件。 The following Codes, Standards and Specifications form a part of this specification to the extent indicated by the references thereto. When an edition date is not indicated for a code or standard, the latest edition and addenda in force at time of purchase shall apply. 下列规范、标准和技术要求规格书为形成本技术规程规格书的一扩展部分。当没有指明规范或标准的出版日期时, 在采购期间应采用在大规模采购期间有效的最新版本以及有效的附录修改单。 API (American Petroleum Institute) API (美国石油协会) Standard 620 标准 620 mended Rules for Design and Construction of Large, Welded, Low Pressure Storage Tanks 大型、焊接、低压储罐的设计和建造施工的推荐规则。 Standard 650 标准 650 Welded Steel Tanks for oil storage. 焊接钢制原油储罐 ASME (American Society Of Mechanical Engineers) Boiler And Pressure Vessel Code) ASME ASME ( 美国机械工程师协会)锅炉和压力容器标准 Section II, Part C Welding Rods, Electrodes, and Filler Metals 第 II册卷章,C 部分篇焊接钢丝条、电焊条和填充金属 Section V Nondestructive Examination 第V册卷章无损检测 Section VIII, Div. I Rules for Construction of Pressure Vessels 第 VIII 册卷章,第 I 分册压力容器建造施工规则 Section IX Welding and Brazing Qualifications 第 IX册卷章焊接与钎焊评定 ASNT (American Society Of Nondestructive Testing) ASNT ASNT (美国无损检测协会)
储罐焊接规范 来自淘豆网m.daumloan.com转载请标明出处.