??????(Cymbal Stand not included) ?????? DWSP776L (9503LB ONLY) qualit y . T o adjust the angl e , turn the wing sc r e w while pl a ying the pedal to achi e v e the desi r ed sound . Once the optimal position is achi e v ed , tighten the inside n ut against the wing sc r e w to lock the angle/position. ???????????????????? 1 . Loosen the drum k e y sc r e w just ab o v e the large k n urled knob on the cable housing. 2 . Rotate the large k n urled knob clockwise to tighten the cable and counter clockwise to loosen it . Be su r e to r e-tighten the k e y sc r e w be f o r e pl a ying. ????????????????????????????????????????? Y our D W 9502LB/9503LB Hi-Hat stand includes built-in , adjustable spurs and non- skid V elc r o? on the bottom of the pedal plate to p r e v ent hi-hat cr a wl . The V elc r o? automatical l y grips on most types of carpeting . T o adjust the spurs , loosen the k e y sc r e ws on the sides of the base casting , l o w er the spurs to their desi r ed position and tighten the sc r e ws . Be ca r eful to use the spurs on carpet/soft surfaces as th e y m a y damage some types of ? ooring . ????????????????????????????? 1 . Rem o v e the cymbals and clutch. 2 . Separate the hi-hat tube and r od sections. 3 . F old the leg assemb l y b y loosening the wing sc r e w in the base section and f olding the legs inwa r d . Once the legs a r e f o
DW 9502LB9503LB HI-HAT STAND 来自淘豆网m.daumloan.com转载请标明出处.
