兼容或配合性故障Compatibleorcompatiblefault.doc

兼容或配合性故障(Compatible or compatible fault)
For example, a definition
This type of failure is mainly due to the user addin and technical
check the latest updates or appear in the system before the list. If not, we should check the specifications;
2) if there was no cause, unstable operation or crash phenomenon, should be removed or updated additional components or equipment, to see whether the system restore to normal working state, technical manuals and a careful reading of new equipment and parts, understand the installation and configuration method:
additional equipment such as normal installation, should check the technical manual to understand the correct installation methods, technical requirements, and as far as possible to use the latest version of the driver. If you can not solve, should check with the working condition of the equipment and the quality of the original system;
whether there is the phenomenon of resources cannot be shared or update check new additional components and original components, namely resource check fault transfer to open the corresponding components are disappearing, in transfer can not be opened, can try to replace the installation slot position, or change the resources in the BIOS distribution;
check whether due to BIOS cause compatibility problems, which can be checked by updating BIOS (note is not the latest version or higher version, can reduce the version check);
to view additional components on the jumper set properly, and make the necessary modifications:
for the use of older cards or software, should pay attention to whether the speed mismatch caused by not working properly:
By setting or changing service system, to check whether the fault disappears. Such as power management services, equipment parameter modification etc.;
9) check whether the existence of the hardware and software of the original performance, through the replacement of hardware or software to check the original shield.
The third part - appendix