Handbook of Polymer Synthesis Second Edition.pdf

DK1229_half-series- 11/24/04 2:21 PM Page A
HANDBOOK OF
POLYMER SYNTHESIS
Copyright 2005 by Marcel Dekker. All Rights Reserved.
DK1229_half-series- 11/24/04 2:21 PM Page B
PLASTICS ENGINEERING
Founding Editor
Donald E. Hudgin
Professor
Clemson University
Clemson, South Carolina
1. Plastics Waste: Recovery of Economic Value, Jacob Leidner
2. Polyester pounds, Robert Burns
3. Carbon Black-posites: The Physics of Electrically Conducting
Composites, edited by Enid Keil Sichel
4. The Strength and Stiffness of Polymers, edited by Anagnostis E. Zachariades
and Roger S. Porter
5. Selecting Thermoplastics for Engineering Applications,
Charles P. MacDermott
6. Engineering with Rigid PVC: Processability and Applications, edited by
I. Luis Gomez
7. Computer-Aided Design of Polymers posites, D. H. Kaelble
8. Engineering Thermoplastics: Properties and Applications, edited by
James M. Margolis
9. Structural Foam: A Purchasing and Design Guide, Bruce C. Wendle
10. Plastics in Architecture: A Guide to Acrylic and Polycarbonate,
Ralph Montella
11. Metal-Filled Polymers: Properties and Applications, edited by
Swapan K. Bhattacharya
12. Plastics Technology Handbook, Manas Chanda and Salil K. Roy
13. Reaction Injection Molding Machinery and Processes, F. Melvin Sweeney
14. Practical Thermoforming: Principles and Applications, John Florian
15. Injection pression Molding Fundamentals, edited by
Avraam I. Isayev
16. Polymer Mixing and Extrusion Technology, Nicholas P. Cheremisinoff
17. High Modulus Polymers: Approaches to Design and Development,
edited by Anagnostis E. Zachariades and Roger S. Porter
18. Corrosion-Resistant posites in Chemical Plant Design,
John H. Mallinson
19. Handbook of Elastomers: New Developments and Technology, edited by
Anil K. Bhowmick and Howard L. Stephens
20. pounding: Principles, Materials, and Techniques, Fred W. Barlow
21. Thermoplastic Polymer Additive