CCNA 经典189.doc

【CCNA640-802之189题最终完全解析】
总结了很多网友的帖子,由于大多数网友只给了答案,现将题目给出,供大家参考:
Topology Based Lab
LAB QUESTION:
This topology contains 3 routers and 1 switch. Complete the topology.
Drag the appropriate device icons to the labeled Device
Drag the appropriate connections to the locations labeled Connections.
Drag the appropriate IP addresses to the locations labeled IP address (Hint:use the given host addresses and Main router information)
To remove a device or connection, drag it away from the topology.
Use information gathered from the Main router plete the configurationof any additional routers. No passwords are required to access the Mainrouter . The config mand has been disabled for the HQ router.
The router does not require any configuration.
Configure each additional router with the following
Configure the interfaces with the correct IP address and enable the interfaces.
Set the password to allow console access to consolepw
Set the password to allow access to pw
Set the password to allow privilege mode access to privpw
Note: Because routes are not being added to the configurations, you will not be able to ping
through the work.
All devices have cable autosensing capabilities disabled.
All hosts are PC’s
===========================
首先在main路由器上show run做为突破口
interface 0/0
ip address
!
interface Serial0/0
ip address