轮机工程英语 （marine engineering english ）.doc

轮机工程英语 03(Marine engineering English 03)
8. Light oil Change from light oil to heavy oil.
39. The main engine starts (reverse) test M/E starting (reversing) test.
40. Emergency stop Test.
41. Control room controls The engine control room control
42. Local control is operated by the machine
43. Remote control from The bridge.
44. The Protection test of the main engine is the Protection test of M/E flywheel trip.
45. Shut-down test of F/w. high temp.
446. The low-pressure parking test of the lubricating oil is shut-down test of . low press.
47. High-pressure oil pump rack number Tooth sector of high pressure oil pump.
The advance Angle is too large (small).
49, nozzle atomizing The atomization of nozzle is too poor.
50, nozzle pressure is too high (low) The pressure of nozzle is too high (low).
51, The nozzle leakage, nozzle leakage.
52. The protection test of turning gear clutch is tested by The protection test of The driving device.
The governor has failed The governor.
54. Hydraulic chain pressure device, Hydraulic chain tightener.
55. Cylinder head start valve The cylinder cover starting valve.
56, The cylinder head start valve is hot.
57, The cylinder head start valve leaks The cylinder cover starting valve.
58. The cylinder oil one-way valve leaks The cylinder oil one - way valve.
59, one-way valve is installed against The cylinder oil cylinder oil