土木工程毕业设计（论文）-某行政综合楼设计-五层框架结构.doc

2
前言 4
5
1工程概况 5
2设计资料 5
3设计过程 6
4本章小结 6
7
1工程概况 7
2主要建筑做法 7
3结构布置及结构计算简图 8
4荷载计算 11
5风荷载的计算 19
6内力计算 22
7内力组合 49
8截面设计与配筋计算 50
板的计算 69
9楼梯的设计 71
10基础设计 74
(1)荷载计算 74
(1)荷载计算 76
三施工组织设计 80
1工程介绍 80
2 施部署及施工顺序 81
3 施工方案 83
4 主要分项工程施工方法 84
5 砌筑工程 92
6 防水工程 93
7 门窗工程 94
8 装饰工程 95
9 工作天数的计算 95
10 质量达标保证措施 99
11 混凝土雨天施工措施 99
12 冬季施工措施 101
13 文明施工保证措施 103
谢辞 105
总结 106
参考文献 107

本工程为济南市解放路一拟建综合楼。根据建筑设计、抗震方面等的要求,确定合理的结构方案和结构布置方案,确定框架按功能分为商业用房和客房,,,抗震设防烈度6度。
结构设计的阶段大体可以分为三个阶段:
(1)结构方案阶段:根据建筑的重要性,建筑所在地的抗震设防烈度,工程地质勘查报告,建筑场地的类别及建筑的高度和层数来确定建筑的结构形式,本工程采用的是框架结构;
(2)结构计算阶段:包括荷载统计、内力组合计算和构件计算;
(3)施工图设计阶段:根据上述计算结果,来最终确定构件布置和构件配筋以及根据规范的要求来确定结构构件的构造措施。
关键词:框架结构;结构设计;内力;水平荷载;钢筋混凝土
全套CAD图纸等,加695132052
The Design of prehensive Building
ABSTRACT
This graduation project is prehensive building in the jiefang road of Jinan、, According to the requirement of architectural design and the earthquake resistance,the reasonable structural scheme was determined. This frame structure can be divided mercial buildings and Standard whole building is about meters and the building area is about 4250. The fire-protection rating is 2 degrees and seismic intensity is 6 degrees
The stage of the structural design can be divided into three stages on the whole:
(1)Structural scheme stage: According to the importance of the building, providing fortification against earthquakes in the earthquake intensity, the geologic prospect report of the project of the building site, classification and height and storey of the building of the building field are counted to confirm the structural form of architecture, what this project is adopted is frame structure;
(2)Calculate stage in structure: Including calculate of loading、 internal force ponent;
(3)Construction drawings design phase: According to described above result of calculation, come, ponent assign ponent mixing muscling ing, confirming structural