静电放电ESD防护标准(中文版).pdf

ANSI/ESD--2007
ANSI/ESD--1999之修订版










建立一个
静电放电控制方案⎯

协会标准电气和
电子零件,装置和设备
(不包括电动引爆装置)的保护












静电放电协会
7900 Turin Road, Bldg 3, Ste 2,
Rome, NY 13440‑ 2069
美国国家标准
2007年3月1日批准
静电放电
ESD Association mittee
Standards Interpretation Bulletin

June 19, 2008

The ESD Association mittee is issuing this interpretation bulletin regarding
ANSI/ESD -2007. This bulletin modifies the requirements specified in Table 3 EPA
Control Items (Garments). Table 3 should now be modified to disregard the two garment types;
“Groundable Static Control Garment” and “Groundable Static Control Garment System”, along
with their Test Methods and Requirements.

Additionally, the “Static Control Garment” Required Limit should be: 1 x 105 ohms to 1 x 1011
ohms, per ANSI/ESD -1997.

These changes are necessary because the referenced document, ANSI/ESD , has been
brought back to a Work in Progress (WIP) status and therefore these two garment types
(mentioned above) are also brought back to WIP status.


Reference Information

Table 3. EPA ESD Control Items
1
Product pliance Verification
Technical ESD Control
Requirement Item Required
Test Method 2 Test Method Required Limit(s)
Limit(s)
Static Control Garment ESD TR53
< 1 x 1011 ohms < 1 x 1011 ohms
(ANSI/ESD ) Garments Section
Groundable Static
ESD TR53
Control Garment < 1 x 109 ohms < 1 x 109 ohms
Garments Section
Garments (ANSI/ESD )
Groundable Static
Control Garment ESD TR53
< x 107 ohms < x 107 ohms
System Garments Section
(ANSI/ESD )


John Kinnear
Working Group Chairman

Tim Jarrett
Standards Chairman
ESD Association mittee
Standards Change Notification


June 14, 2007

This notification reports on two typos in ANSI/ESD -2007, Table 2 Personnel Grounding
Requirement. These correct