Cisco路由器3G配置.pdf.pdf

Configuring the 3G Wireless High-Speed WAN
Interface Card for Cisco 1841, 1861, and 2800 and
3800 Series Routers (HWIC-3G-CDMA and
HWIC-3G-CDMA-x)
First Published: March 14, 2007
Revised: April 15, 2009
The Third Generation (3G) Wireless High-Speed WAN Interface Card (HWIC) is a multiband,
multiservice WAN card for use over CDMA Radio works (RAN). It is used as the primary
WAN connectivity and as a backup for critical applications. The 3G HWIC can also be used as the
primary WAN connection.
It is supported on the following Cisco integrated services routers (Cisco ISRs):
• Cisco 1841
• Cisco 1861
• Cisco 2800 series
• Cisco 3800 series
The 3G wireless HWIC provides the following functionality:
• Broadband WAN connectivity using high speed cellular data technology
• Support for the following technologies:
– CDMA2000 Evolution-Data Optimized (EVDO) Revision (Rev) A
– CDMA2000 EVDO Rev 0
– CDMA Single channel Radio Transmission Technology (1xRTT)
• Automatic work selection
• Always-on capability
• Multiple antenna and cable options:
– Diversity antenna
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
© <2009> Cisco Systems, Inc. All rights reserved.
Configuring the 3G Wireless High-Speed WAN Interface Card for Cisco 1841, 1861, and 2800 and 3800 Series Routers

– Indoor and outdoor external antennas
– Radio Frequency Ultra-Low Loss (RF-ULL) cable length from 10 ft to 75 ft
• IOS-based Mobile IP work mobility(NEMO)
• Supports over-the-air service provisioning (OTASP), over-the-air (IOTA) data profile
provisioning, and Open Mobile Alliance device management (OMA-DM).
• Multiple product SKUs for multiple CDMA carriers
• Multiple external antenna options
• Support for diversity antenna
• Static and dynamic IP addressing
• Modem-based support for mobile IP
• Cellular interface based on the async interface in Cisco IOS
• Mobile IP profile managem