CCNA的全套标准实验 实验05 RIP路由.doc

实验五: RIP 动态路由的配置拓扑图实验介绍: 本实验所用的设备为:三台带有 2个 S0 口和一个 E0 口的路由器,三台 PC 实验目的: 灵活掌握 RIP 的动态路由的配置。实验步骤: 1. R1 上的配置: Router> Router>en Router#conf t Router(config)#host r1 r1(config)#int e0 r1(config-if)#ip add r1(config-if)#no shutdown r1(config-if)#exit r1(config)#int s0 r1(config-if)#ip add r1(config-if)#no shutdown r1(config-if)#clock rate 56000 r1(config-if)#no shutdown r1(config-if)#exit r1(config)#router rip r1(config-router)#net r1(config-router)#^Z RIP 协议启用前的路由表 r1#show ip route Codes: C- connected, S- static, I- IGRP, R- RIP, M- mobile, B- BGP D- EIGRP, EX - EIGRP external, O- OSPF, IA- OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2,E- EGP i- IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, *- candidate default U- per-user static route Gateway of last resort is not set C is directly connected, 0 C is directly connected, Serial0 RIP 协议启用后的路由表 r1#show ip route Codes: C- connected, S- static, I- IGRP, R- RIP, M- mobile, B- BGP D- EIGRP, EX - EIGRP external, O- OSPF, IA- OSPF inter area E1 - OSPF external type 1, E2 - OSPF external type 2,E- EGP i- IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, *- candidate default U- per-user static route Gateway of last resort is not set C is directly connected, 0 C is directly connected, Serial0 R