脚踏双刀修角机英文说明书---修改.pdf

: .

Mitre Gui 2 The measuring table with the measuring system fits to the right hand side
of the main table.
 At the back of the base is the foot pedal pivoting point and two main
springs which are connected to the foot pedal are also anchored on either side
of the base.
 The measuring table together with the measurement rule should be fitted to
the right hand side of the main table.
 The fences are fitted to the main table, so that they can pivot about a
central point and can be clamped at any angle from 45 to 90 degrees.
Waste collection
We also provide a heavy duty polythene collection bag which is extremely
effective.
Application
 The Mitre Guillotine machine is designed to give you a reliable and
security and accurate operate to produce a wood art with a very good surface
finish.
 The Mitre Guillotine machine is exclusively provided to cut wood piece,
such as pine, oak, birch, maple etc. This machine can not be used to cut any
metal pieces.
 Any careless operation violate this manual was considered that you do not
comply with the reasonable operate rule. The manufacturer is not liable for any
damage or any injuries may cause by the violation. As a result, the User bears
the damage and the injuries.
3 This machine can not operate in the wet or closed to explosion hazards
Circumstance.
 This machine must manipulate by operator over 18 years, who is familiar
with the machine and has been informed the dangers involved. Repair job must
be carried out by authorized Agent or professional customer service staff.
Safety Regulations
Warning, the Mitring blades are extremely sharp!
 Take great care when cleaning around the Mitring Head as the Mitring
Blades are extremely sharp.
 To ensure that the Mitring Head does not mo