建筑工程结构部分论文_毕业论文.doc

毕业设计(论文) 题目: 靖西县水利电业有限公司办公楼设计(二) (结构设计部分) 学院: 土木建筑工程学院专业: 土木工程(建筑工程方向) 班级: 建工 091 学号: 0903110126 姓名: 陈玮指导教师: 梁新彩日期: II 摘要本次设计的任务是对靖西县水利电业有限公司办公楼进行结构与施工组织的设计,根据设计任务书以及相关资料,确定结构采用钢筋混凝土框架剪力墙结构,层数为 10层,局部为 11层,建筑高度 。本说明书是本次毕业设计的结构部分和施工部分,结构部分是历时最长、最重要的一部分,结构设计的阶段大体可以分为四个阶段: 1结构方案确定阶段:根据建筑的重要性,建筑所在地的抗震设防烈度, 建筑场地类别和设计说明书等确定建筑的高度、布置、选型和建筑的结构形式,本工程采用的是框架剪力墙结构。 2结构计算阶段:主要有竖向荷载计算,板、楼梯、基础的计算。 3施工图设计阶段:根据上述计算结果和规范的相关要求,最终确定构件尺寸、构件配筋和结构构件的构造措施及其做法。 4PKPM 电算阶段:进行电子计算,与手算结果进行比较。本设计的特点之一,运用了大学四年所学过的很多理论,计算中多种计算方法得到体现,使自己掌握了多方面的知识。关键词:框剪结构 PKPM 荷载内力组合工程量进度计划 III II Jingxi County Water and Electric Co., Ltd. office building (二) Abstracts The task istodesign aWater and Electric Industry Co. office of Jingxi County ,the structural design and anization, determined that the engineering adopts tocast-in-situ concrete frame structure, the number oflayer issix, the height ofconstruction is 。The statement isthe structur ofthis graduation design and Construction design ,with isthe most time-consuming and important part. betermination ofproject: According tothe importance ofthe building, providing fortification against earthquakes inthe earthquake intensity, Building venues such asthe type and design ofbrochures, determined the height ofthe construction, layout, selection and construction ofthe structure, the project isbased onthe framework structure; calculate: Mainly including gravity load, side face just the sway, bination ofinternal forces, ponent sections design and foundation design ; drawings design phase: According tothe above results and the relevant specification, and then determined ponents size, reinforcement and the structural measures. calcalation ofPKPM: First, calculated the PKPM, and pared the results with artificial. The advantage in this design was that many theories studied inuniversity infour years was many kinds putational methods was manifested putation ,so which caused myself tograsp the