1. Refer to the exhibit. All routers are running OSPF. What cost would JAX put in its routing table for the ? 2 156 1564 1785 1787 2. Refer to the exhibit. Router1 and Router2 are running OSPF. The show ip ospf mand reveals no neighbors. What is a possible cause? OSPF autonomous system IDs do not match. OSPF process IDs do not match. work types are identical. OSPF hello or dead timers do not match. 3. A fully converged five router work has been running essfully for several weeks. All configurations have been saved and no static routes are used. If one router looses power and reboots, what information will be in its routing table after the configuration file is loaded but before OSPF has converged? All routes for the work will be present. Directly works that are operational will be in the routing table. Because the SPF algorithm has pleted all calculations, no routes will be in the table. A summary route for all previously learned routes will automatically appear in the routing table until all LSPs have been received by the router. 4. Refer to the exhibit. What configuration statements would give the results that are shown in the output of the show ip mand? B(config)# int fa0/0 B(config-if)# router-id B(config)# int lo0 B(config-if)# ip address B(config)# router ospf 1 B(config-router)# router-id B (config)# router ospf 1 B(config-router)# ip address 5. Refer to the exhibit. When OSPF is operational in the work, what neighbor relationship is developed between Router1 and Router2? A FULL adjacency is formed. A 2WAY adjacency is formed. Router2 will e the DR and Router1 will e the BDR. Both routers will e DROTHERS. 6. What does OSPF use to calculate the cost to a work? bandwidth bandwidth and hop count bandwidth and reliability bandwidth, load, and reliablity 7. Refer to the exhibit. The routers in the exhibit are using default OSPF configuration settings to advertise a
