CCNA 2 Practice Lab Solutions Objective To use dynamic and static routing to work connectivity. Scenario Given a address provide four s to support at least 25 hosts. The work requires two of works and the other two will be used in the future. Use RIP and connect to a web server with the IP address of . The is not to be advertised by the ISP router. Use a static route to reach work. Configure all routers with a hostname and use “cisco’ as the password for console, enable secret and access. Step 1 Cable the labs according to the topology in the diagram. Attach a workstation to the 0 interface on RouterA. Configure the workstation with the appropriate IP address. Host A and the web server are to be assigned the fifth usable IP address on the assigned . Step 2 ISP router configuration On the ISP router configure the hostname, console password, enable secret password, and access. Router>enable Router#configure terminal Router(config)#hostname ISP ISP(config)#enable secret cisco ISP(config)#line console 0 ISP(config-line)#login ISP(config-line)#password cisco ISP(config-line)#exit ISP(config)#line vty 0 4 ISP(config-line)#login ISP(config-line)#password cisco ISP(config-line)#exit ISP(config)# Step 3 Configure the interfaces on the ISP router. After calculating the IP address requirements the result is that wo
ccna 2 practice lab solutions-router 来自淘豆网m.daumloan.com转载请标明出处.
