手动圆角机说明书英文版.docx

手动圆角机说明书
Instruction: Manual fillet machine
一,主要用途与适用范围
手动圆角机广泛用于名片,书刊,包装装潢,文件,证件,袋类,卡折,笔记本PVC卡片等切圆角。适用于纸张,纸板,菲林,PVC证件,皮革等。
本机操作方便省力。轻便,操作方便,成本低。它是很受欢迎的,零维护率。
Applications
Manual fillet machine is widely used for fillet-cutting of business cards, books, package and decoration, documents, certificates, bags,and notebook’s PVC cards, etc, which applys to paper, cardboard, film, PVC certificates, leather, etc.
Light weight and strength-saving, easy operation and low cost, it is popular with no needs of maintenance.
二,技术规格
切角高度: 30MM
切角半径:R3, R4, R6, R8, R10 (随机配R6,R10,需要其他规格则要另行购买)
机器尺寸:L X W X H (MM): 260 X 160 X 168
机器净重: 9KG
B. Specifications
Cutting Height: 30MM;
Fillet Radius: R3, R4, R6, R8, R10 (R6, R10-Random,Others-Please purchasing seperately);
Dimension: 260 X 160 X 168MM (L X W X H );
Net Weight: 9KG.

根据切圆角半径之需,务必使用上成型刀与下成型刀相同半径的刀,待上下刀的凹凸部分吻合后拧紧压力螺钉,用一张纸实切成功后再切成品
C. How to Use
Cut the fillet radius as required, ensure to use knife with the same redius as the upper and lower molding blades, tighten the pressure screw since the touch of concave and convex part of the upper and lower molding blades, test with a piece of paper then on products.
更换刀片
把压制装置3拆下
把手柄1向下压到底,用锁针7插入锁针孔10,固定住刀架2
把上刀4和下刀5拆下,更换所需规格的刀片
先把上刀4装上固定好,再把下刀5的圆弧面跟上刀圆弧面贴紧,然后锁紧下刀
把手柄1向下压,取出锁针7
换刀完成
Knife Replacement
Ⅰ. Remove paper pressing deviceƒ;
Ⅱ. Press to the limi