学士学位论文
纳米SiO2改性双酚A型环氧树脂的制备及性能研究
论文作者:
指导教师:
学科专业:
提交论文日期:
论文答辩日期:
学位授予单位:
中国· 重庆
目录
摘要 Ⅰ
Abstract. Ⅱ
1引言 1
1
1
2
2
—凝胶法 2
插层法 2
3
2实验部分 3
3
3
3
4
4
4
5
5
6
3结果分析讨论 7
7
7
9
10
10
4实验结论 11
参考文献 11
致谢语 14
纳米SiO2改性双酚A型环氧树脂的制备及其性能研究
2008级化学专业本科一班胡浪涛指导老师唐英
摘要:本文通过用原位聚合法,利用纳米二氧化硅对双酚A型环氧树脂进行改性,使纳米二氧化硅表面的硅醇基(Si-OH)和环氧树脂中的环氧基进行键接,通过对改性后的双酚A型环氧树脂的性能检测,最终确定改性反应的条件:反应温度为100℃左右;反应时间为2h;纳米二氧化硅的加入量为10%-15%。通过利用红外(IR)对改性后环氧树脂的结构进行表征,结果表面改性后产物中有新键硅氧碳(Si-O-C)产生,形成无机-有机结构。
关键词: 纳米二氧化硅; 改性; 双酚A环氧树脂; 原位聚合法
Preparation and properties of nano-SiO2 modified bisphenol a type epoxy resin
Chemistry specialized 2008 levels of undergraduate Hu Langtao Instructor: Tang Ying
Abstract:In order to linkage the epoxy group of epoxy resin and the Si-OH on the surface of nano-silica dioxide, we take advantage of the nano-silica dioxide to modify bisphenol A type epoxy resin and adopt the in-situ polymerization testing the properties after the modificaiton to ascertain the final modified rection conditions:the reaction temperature is around 100℃, the reaction time is 2h, the nano-silica dioxide added amount is about 10%-15%. We use infrared spectrum to characterize the structure of the epoxy resin which had been modified ,the result of the characterization demonstrate that a new bonding Si-O-C has created mong the products and formed anic anic structure.
Keywords: Nano-SiO2; Bisphenol A epoxy resin; Modified; In situ polymerization
1引言
环氧树脂用途非常广泛,主要应用于防腐涂料、胶粘剂、复合材料树脂基体、电子封装材料、浇注料、电子及电子工程阻燃元件材料、覆铜板、灌封料、层压板等在化工、电子电力、机械、航天航空、涂料、粘接等领域,但环氧树脂固化后,交联密度高,内应力大,质脆,耐候性不好等缺陷,在很大程度上制约了环氧树脂在很多领域的应用[1],因此在对环氧树脂的改性是一个很重要的课题。
环氧
纳米二氧化硅改性双酚a型环氧树脂 来自淘豆网m.daumloan.com转载请标明出处.