高速道路设计_毕业设计说明书.doc

HEBEI UNITED UNIVERSITY
毕业设计说明书
GRADUATE DESIGN
设计题目:京建公路(唐山段)养护改造工程
—K0-K10段施工图设计

2013年5月29日
摘要
本设计是京建公路(唐山段)养护改造工程—K0至K10段施工图设计。此工程起于龙景关(承唐界),途经拔子、道马寨村、洒西河桥镇、草头峪、烟囱山、杨家河沿村、小寨村,张胖沟、受益店、滦阳镇、矾石峪、张家店,止于胡家店,全长约10公里。,路面宽7m。,路面宽10m(沥青混凝土路面)的二级公路标准设计。主要作了如下工作:采用纬地进行了路线设计、平面设计、纵断面设计、横断面设计以及土石方量计算,接着在路线设计的基础上进行了路基路面设计,包括一般路基设计、路面设计。
关键词京建公路(唐山段);二级公路;沥青混凝土;养护改造
Abstract
The design is the reconstruction and conservation project of Beijing building highway (Tangshan segment)—the construction drawing design of K0 to K10 segment. The project begins with Long Jingguan (Chengtang Boundary) and ends with Hu Jiadian, via Bazi, Daomazhai Village, SaxiHeqiao Town, Caotou Valley, Yancong Mountain,YangjiaHeyan Village,Xiaozhai Village,Zhangpang Channel, ShouyiDian, Luanyang Town,Fanshi Valley and Zhang Jiadian, with total length of ten kilometers. The roadbed width of the old route is meters and the road width is 7 meters. The proposed project is according to secondary road standard, the roadbed width of which is 10..5 meters and the road width is 10 meters (Asphalt Concrete Pavement). The major work is the following: Finishing the line design, the graphic design, the vertical alignment design, the cross section design and the earthwork calculations by Hint CAD. What is more, complete the roadbed and pavement design based on the line design.
Keywords Beijing building highway (Tangshan segment); secondary road; Asphalt Concrete; the reconstruction and conservation project
目录
摘要 I
ABSTRACT II
第1章绪论 1
第2章项目简介 2
2
设计原始资料 2
任务依据 2
技术依据 2
3
3
、水文 3
3
3
3
4
4
4
4
5
第3章平面设计 6
选线设计 6
选线的基本原则 6
6
7
7
7
8
第4章纵断面设计 10
10
10
10
10
11
11
4.