环氧树脂清漆的用途和使用说明.doc

Intended Uses
用途
适用于金属保护,例如沿海地区和湿热地区的器材防护装饰,自然干燥或烘干,成膜后具有防潮性和耐油性.
Suited for protecting metals, such as anti-corrosion and decration of equipments in coastal areas and humid hot regions, natural drying or stoving, it forms a film with resistance to moisture and oil.
Product
Information产品简介
浅黄色,由环氧树脂和固化剂按比例混合配制而成..
Light yellow, it is producted by mixing epoxy resin with curing agent according to the regulated ratio.
Application details
产品数据
Volume Solids 固体份
≥%
Dry Flm Thickness干膜厚度
20 microns equivalent to 68 microns wet film
20微米相当于68微米湿膜厚
Theoretical Coverage 理论涂布率
14m2 /Kg 14平方米/公斤
Practical Coverage 实际涂布率
Allow appropriate loss 允许适量损耗
Storage and Handling
施工详述
Mix Radio 混合比
A : B=3:1(by weight) 甲:乙=3:1(重量比)
Method of Application 施工方法
Airless Spray 无空气喷涂 mended 推荐采用
Brush or Roller 涂刷或辊涂 mended 推荐采用

Conwentional Spray 传统喷涂 Not mended 不推荐采用
Thinner 稀释剂 SC003
Cleaner 油漆设备清洗剂 SC003
Pot Life 使用期 25℃:6h 25℃6小时
Storage 贮存期 One year 一年
Drying time
干燥时间
Substrate
Temperatur
e底材温度
Touch Dry
表干
(h)
Hard Dry
硬干
(h)
Over coating Interval
覆涂间隔
Min最短
Max最长
25℃
4
24
24 hours 小时
7days(天)

环氧树脂清漆的用途和使用说明
Storageand
Handling
贮存与管理
Storage 贮存 Store in cool and dry conditions 贮存于阴凉干燥处
Pack size 包装规格 A;15Kg in 20 liter container 甲:15公斤装于20公升容器中
B:5Kg in 5 liter container 乙:5公斤装于5公升容器中
Flash Point 闪点 27℃
Specific Gravit