DRAFT FOR DEVELOPMENT DD CEN ISO/TS 15875-7:2003 Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 7: Guidance for the assessment of conformity ICS ; Licensed Copy: Institute Of Technology Tallaght, of Technology, Tue Dec 19 09:54:30 GMT+00:00 2006, Uncontrolled Copy, (c) BSI
DD CEN ISO/TS 15875-7:2003 National foreword This Draft for Development is the official English language version of CEN ISO/TS 15875-7:2003. This publication is not to be regarded as a British Standard. It is being issued in the Draft for Development series of publications and is of a provisional nature. It should be applied on this provisional basis, so that information and experience of its practical application can be obtained. A review of this Draft for Development will be carried out not later than 2 years after its publication. Notification of the start of the review period, with a request for the submission ments from users of this Draft for Development, will be made in an announcement in the appropriate issue of Update Standards. According to the replies received, the responsible mittee will judge whether the Draft for Development can be converted into a British Standard or what other action should be taken. Observations which it is felt should receive attention before the official call for comments will be ed. These should be sent to the Secretary of the responsible BSI mittee PRI/88/2, Plastics piping for pressure applications, at British Standards House, 389 Chiswick High Road, London W4 4AL, giving the document reference and clause number and proposing, where possible, an appropriate revision of the text. A list anizations represented on this mittee can be obtained on request to its secretary. Cross-references The British Standards which implement inter
