SolidWorks ? Tutorial 10 DRAWING OF THE AXLE SUPPORT Preparatory Vocational Training and Advanced Vocational Training To be used with SolidWorks ? Educational Edition Release 2008-2009 SolidWorks for VMBO en MBO Tutorial 10: Drawing of the Axle Support 2 ? 1995-2009, Dassault Systèmes SolidWorks Corp. 300 Baker Avenue Concord, Massachusetts 01742 USA All Rights Reserved. . Patents 5,815,154; 6,219,049; 6,219,055 Dassault Systèmes SolidWorks a Dassault Systèmes . (Nasdaq:DASTY) company. The information and the software discussed in this document are subject to change without notice and should not be consi- mitments by Dassault Systèmes SolidWorks Corp. No material may be reproduced or transmitted in any form or by any means, electronic or mechanical, fo r any purpose without the express written permission of Dassault Systèmes SolidWorks Corp. The software discussed in this document is furnished under a license and may be used or co pied only in accordance with the terms of this license. All warranties given by Dassault Systèmes SolidWorks Corp. as to the software and documen- tation are set forth in the Dassault Systèmes SolidWorks Corp. License and Subscripti on Service Agreement, and nothing stated in, or implied by, this document or its contents shall be considered or deemed a modification or amendment of such warranties. SolidWorks? is a registered tr ademark of Dassault Systèmes SolidWorks Corp. SolidWorks 2005 is a product name of Dassault Systèmes So- lidWorks Corp. FeatureManager? is a jointly ow ned registered trademark of Dassault Systèmes SolidWorks Corp. Feature Palette? and PhotoWorks? are trademarks of Das- sault Systèmes SolidWorks Corp. ACIS? is a registered tradem ark of Spatial Corporation. FeatureWorks? is a registered trademark of Geometric Soft- ware Solutions Co. Limited. GLOBEtrotter? and FLEXlm? are registered trademarks of Globetrotter Software, Inc. Other brand or product names are t
