BS Standards.doc

08-08M 08 44 13 - 1 SECTION 08 44 13 GLAZED ALUMINUM CURTAIN WALLS SPEC WRITER NOTE: Delete between // ---- // if not applicable to project. Delete any other item or article not applicable in Section and renumber paragraphs. PART 1- GENERAL DESCRIPTION A. Section specifies glazed aluminum curtain wall system. 1. Thermally isolated, pressure equalized on interior. 2. Type: // Stick // Unit // Unit and Mullion // system to include following: a. // Glass // Insulated Metal Panels // Uninsulated Metal Panels // Glass Spandrel Panels // . b. Integral reinforcing. c. Closures, trim, subsills and flashings. d. Column covers. e. Fasteners, anchors, and related reinforcement. RELATED WORK A. Structural steel: Section 05 12 00, STRUCTURAL STEEL FRAMING. B. Miscellaneous metal members: Section 05 50 00, METAL FABRICATIONS. C. Firestopping between curtain wall and structure: Section 07 84 00, FIRESTOPPING. D. Sheet metal flashing and trim: Section 07 60 00, FLASHING AND SHEET METAL. a. Joint sealants: Section 07 92 00, JOINT SEALANTS. //E. Aluminum and glass hinged entry doors and storefront construction: Section 08 41 13, ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS. // //F. Revolving entrance doors: Section 08 42 33, REVOLVING DOOR ENTRANCES. // //G. Aluminum windows: Section 08 51 13, ALUMINUM WINDOWS. // //H. Aluminum windows: Section 08 51 , SIDE-HINGED ALUMINUM WINDOWS. // //I. Metal framed skylights: Section 08 63 00, METAL-FRAMED SKYLIGHTS. // 1. Glazing: Section 08 80 00, GLAZING. 2. Finish Color: Section 09 06 00, SCHEDULE FOR FINISHES. 3. Louvers and wall vents: Section 08 90 00, LOUVERS AND VENTS. QUALITY ASSURANCE A. Qualifications: 08-08M 08 44 13 - 2 1. Approval is required of products or service of proposed manufacturer, suppliers and installers, and will be based upon submission by Contractor of certification that: a. Manufacturers Qualifications: Manufacturer with five (5) years continuous documented experience in // design, // fabrication, // an