/ 45
毕业设计(论文)
基于单片机烟雾报警器系统的设计与实现
姓 名
系 别 、专 业 计算机科学系通信工程
导师姓名、职称
完 成 时 间
I / 45
目 录
摘 要ﻩI
ABSTRACTﻩII
1 导论ﻩ1
1.1论文研究来源、目的和意义ﻩ1
1.3论文主要任务ﻩ2
2 烟雾检测报警器的方案设计ﻩ3
2.1烟雾检测报警器设计思路ﻩ3
3 烟雾检测报警器的硬件设计ﻩ7
4 烟雾检测报警器的软件实现ﻩ16
结 论ﻩ20
参考文献ﻩ21
致 谢ﻩ22
附 录1ﻩ25
附 录2ﻩ25
附 录3ﻩ25
摘 要
本设计采用89S52单片机结合MQ-2传感器技术而开发设计了这一烟雾报警系统。论文中的烟雾报警器小巧轻便,适用于安装在含有爆炸性气体环境场所,还可使用于石油、化工等行业具有防爆要求的场所,可以安装在家里,也可以安装在露天、室外使用,防止和减少火灾危害,保护人身和财产安全。
以89S52单片机和MQ-2烟雾传感器为核心设计的烟雾报警器可以实现烟雾报警、溶度显示、看门狗自检单片机状态功能、手动紧急报警等功能。本次设计的烟雾报警器结构简单、性能稳定、使用方便、价格便宜等优点。就有一定的使用价值。
关键词:烟雾;报警器;89S52;MQ-2传感器
ﻩ
/ 45
ABSTRACT
This design USES the 89S52 microcontroller combined with MQ-2 sensor technology and the development of design the smoke alarm system. In the paper the smoke alarm small and portable, designed for installation in contain explosive gases place, still can use in petroleum, chemical and other industries with the requirements of the explosion-proof place, can be installed in the home, can also be installed in the open air, outdoor use, and prevent and reduce the danger of fire protection of personal and property security.
In 89S52 single-chip microcomputer and MQ-2 smoke sensor as the core design of smoke alarm can realize smoke alarm, solubility display, manual emergency alarm functions. The design of the smoke alarm simple structure, stable performance, easy to use, cheap price, etc. Have some use value.
Key words: Smoke; alarm apparatus; 89S52; sensor
I / 45
1 导论
论文研究来源、目的和意义
.1 论文研究来源
随着社会的进步,人们的生活越来越好但也伴随着越来越多的隐患,由于在现代城市家庭里,许多人因不懂家庭安全常识引起火灾事故,使幸福家庭眼间毁于一旦,有的甚至导致家破人亡,而且一旦发生居民家庭火灾,处置不当,是造成人员伤亡的重要
基于单片机的烟雾报警器论文 来自淘豆网m.daumloan.com转载请标明出处.