Panasonic SJ-MR200简易中文说明书 Panasonic SJ-MR200 simple Chinese Manual Main function button description: liquid crystal ddication Battery residue display MONO:MONO playback / recording representation This machine is usually in standard recording (stereo) mode. For long recordings. press the "REC" recording button. press the "DE:ETE/MODE" button, continue to appear "MONO SYNC" in the display window. To switch back to the stereo recording again, just press MODE to MONO, and the symbol disappears. Please note: if the "SYNCHRO" switch is set to ON, you will not be able to use monophonic recording. REC: recording representation Begin recording: uses fiber digital lines to synchronize recordings (just for CD player to MD player recording method) To use the AC power supply, 1. CD Walkman, earthquake off the optical fiber line (round - round) connected to the white hole, waiting for the notice of the fiber output (to see if the fiber line has an output, and press CD at this point, the other end of the MD line will have red light. If there is no red light, then you are wired to the wrong line.) The 2. MD player uses the AC power cord fiber wire (round head round head) to the OPT/LINE IN fiber optic input hole by" is waiting to be recorded.) 4. press the "DELETE/MODE" button until the display window appears "SYNC sync recording"”. Press the CD playback button. At this point, MD starts recording synchronously. To stop recording, press the button. Please note: if you want to pick a song recording, please press CD again after the playback button, or select the tracks immediately with love. uses general analog signal line recording (refer to the above fiber digital line synchronous recording method to correct itself) uses microphone recordings connect the microphone to the MIC (PLUG, IN, POWER) Jack (use the MD dedicated stereo microphone for best results) press the REC switch and then press the button, (at this point, "REC" will appear on the display window
