兴德规格书.doc

APPROVAL SHEET
承认书
APPROVED BY
承认厂商: 浙江兴德电子有限公司
DESCRIPTION
型名:
APPROVAL NO.:
承认号码:
SIGNATURE:
签章:
DATE:
日期:
R
UL: Recognized NO. E256068
ISO9001:2000 Certificate
浙江兴德电子有限公司
承认书目录
CONTENTS OF SPECIFICATION
1、封面……………………………………………………………………………………1
2、目录……………………………………………………………………………………2
3、技术参数………………………………………………………………………………3-6
4、外形图…………………………………………………………………………………7-9
5、材质清单………………………………………………………………………………10
6、环境管理物质不使用说明书…………………………………………………………11
7、SGS 报告………………………………………………………………………………12-14
承认书
SPECIFICATION
MODEL TYPE(产品型号):条形连接器 MODEEL NO.(产品料号):
ITEM 项目
TEST CONDITIONS 测试条件
PERFORMANCE 性能要求
ELECTRICAL PERFORMANCE 电气性能
、VOLTAGE RATING 额定电压:250V AC/DC (RMS)
、CURRENT RATING 额定电流:
1A
CONTACT RESISTANCE
接触电阻
BEING MEASURED AT 1K Hz±200Hz AT NO LOAD
在1KHz±200Hz无载条件下测量
Max.
Max.
1B
INSULATION RESISTANCE
绝缘电阻
APPLY DC 500V BETWEEN ANY TWO OPEN TERMINALS AND BETWEEN THE TERMINAL AND THE FRAME FOR 30 SECOND
在DC 500V条件下测任意两个端子之间绝缘电阻持续30 秒
1000MΩ Min.
1000MΩ Min.
1C
WITHSTAND VOLTAGE
耐压
APPLY 1000V AC(RMS) BETWEEN ANY OPEN TERMINALS AND BETWEEN THE TERMINAL & THE FRAME, FOR 60 SECOND
在端子之间加1000V AC 电压,持续60 秒
SHALL BE FREE FROM DIELECTIC BREAKAGE
无击穿现象出现及飞弧闪烁发生
PERFORMANCE 机械性能
2A
TERMINAL STRENGTH
端子强度
A STATIC FORCE OF 12N BEING APPLIED IN ONE DIRECTION ON THE TIP OF THE TERMINAL FOR 30 SECOND
一个12N的静负荷垂直施加在端子顶部方向上持续30 秒
THE TERMINAL MAY BE DEFORMED, BUT SHALL NOT SUSTAIN ANY TROUBLE AS DEVIATION AND BREAKING OF INSULATION MATERIAL ELECTRICAL PERFORMANCE OF THE ABOVE ITEM 4 SHALL BE ASSURED
端子无脱落、松动、塑件体无破裂,并且满足各项电气性能,端子可允许有变形。
MODEL TYPE(产品型号):条形连接器 MODEEL NO.(产品料号):
ITEM 项目
TEST CONDITIONS 测试条件
PERFORMANCE 规格
耐久性
3A
LIFE TEST
寿命试验
AT THE CONDITIONS OF 250V DC 3A, 50,000 CYCLES OPERATING AT A RATE OF 15-20 CYCLES PER MINUTE
在250V DC 3A负载条件下,以操作频率为15-20次插拔产品50,000次
⑴CONTACT RESISTANCE Max.
Max.
⑵INSULATION RESISTANCE 1000MΩ Min.
绝缘电