带式输送机安装说明书.doc

带式输送机安装说明书
2

———————————————————————————————— 作者：
———————————————————————————————— 日期：

个人收集 仅供参考学习 勿做商业用途

带式输送机
Blet conveyor
安装使用说明书
Installation and operation instruction
联系 ：0738-3537338 ：0738-3537909
湖南省映鸿科技
20009年
Tel :0738—3537338 fax:0738—3537909
YingHong Science&Technology ,Hunan
2021
3

个人收集 仅供参考学习 勿做商业用途
一、 带式输送机安装说明书
Belt conveyor installation instruction
1. 带式输送机安装标高,均以图纸为准。
Belt conveyor installation length are with drawings
2. 在设备安装中如发现套用图纸或土建图纸所注标高与工艺布置图不一致时需核对其标高。
It is necessary to check its standard height when that of drawings or buider's work drawing are not the same with Process arrangement in process of installation.
3. 带式输送机安装、调整、试运行等内容除按本说明书要求进展外、设备安装手图及厂家图纸说明书和技术要求?带式输送机施工及验收技术标准?进展 施工和验收。对主要设备应建立施工、验收记录。
Belt conveyor in installation, adjustment, commissioning, etc according to the content in addition to the specifications, equipment installation hand diagram and drawings specifications and technical requirements of the manufacturer of the belt conveyor technology standard construction and acceptance of construction and acceptance. For major equipment shall establish construction and acceptance record.
4. 带式输送机安装前,应对土建施工的建筑物的各层标高、根底、埋件及预留孔洞等进展全面检查,确认符合有关的质量验收标准前方可进展安装。
It had better check completely standard height、foundation、built-in and reserve holes of every floor of the building befor installation of belt conveyor, and installation is feasible after confirming that comply with the relevant quality acceptance standard .
5. 所有零部件(包括外协件)必须经检验合格,配套件、外购件等必须有合格证书方可进展安装。
All components (including outsourcing) must be passed the inspection, fittings, purchased