Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed A N AME RI C A N NAT I ONA L STA NDA RD ASME -2007 (Revision of ASME -1998) ASME -2007 (Revision of ASME -1998) Metallic Gaskets for Pipe Flanges Ring-Joint, Spiral-Wound, and Jacketed AN AMERICAN NATIONAL STANDARD Date of Issuance: May 19, 2008 The next edition of this Standard is scheduled for publication in 2013. There will be no addenda issued to this edition. ASME issues written replies to inquiries concerning interpretations of technical aspects of this Standard. Interpretations are published on the ASME Web site under mittee Pages at http://cstools. as they are issued. ASME is the registered trademark of The American Society of Mechanical Engineers. This code or standard was developed under procedures accredited as meeting the criteria for American National Standards. The mittee that approved the code or standard was balanced to assure that individuals petent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review ment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not “approve,”“rate,” or “endorse” any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorseme
