CCNA实验手册.doc

CCNA实验手册
Norvel Networks
文件名：
最后更新：6/17/2022
目录
实验 1． 登录Cisco路由器/交换机 2
实验 2． 初始化路由器和创建Startup-ment setup? [yes/no]: yes
//是否进行基本配置
Configuring global parameters:
Enter host name [Router]: Rack141R1
//输入路由器的hostname
The enable secret is a password used to protect access to
privileged EXEC and configuration modes. This password, after
entered, becomes encrypted in the configuration.
Enter enable secret: cisco
//输入路由器的特权md5密码
The enable password is used when you do not specify an
enable secret password, with some older software versions, and
some boot images.
Enter enable password: cisco
//输入路由器的特权密码(明文显示在配置文件中)
% Please choose a password that is different from the enable secret
//不允许特权md5密码与特权密码(明文)相同
Enter enable password: training
//再次输入特权密码（明文）
Norvel Networks
文件名：
最后更新：6/17/2022
The virtual terminal password is used to protect
access to the router over a network interface.
Enter virtual terminal password: training
Configure SNMP Network Management? [yes]: yes
//是否配置SNMP网管协议
Community string [public]: public
//配置SNMP网管协议的Communtiy社团值
Current interface summary
Any interface listed with OK? value "NO" does not have a valid configuration
Interface IP-Address OK? Method Status Protocol
Ethernet0/0 unassigned NO unset up up
Ethernet0/1 unassigned NO unset up up unassigned NO unset up
Serial1/0 unassigned NO unset up down
Enter interface name used to connect to the
management network from the above interface summary: ethernet0/0
//对路由器上的某个接口进行配置，输入接口的名称即可
Configuring interface Ethernet0/0:
Configure IP on this interface? [yes]: yes
//是否在接口上配置一个IP地址
IP address for this interface:
//配置接口的IP地址
Subne